KTM 390 '20-'23 Adventure/RC Cruise Control
KTM 390 '20-'23 Adventure/RC Cruise Control
12 In Stock
This kit adds much needed cruise control to the venerable KTM 390 Duke and Adventure bikes. This kit requires no splicing, cutting, programming, just plug in and cruise.
Compatibility
- 2020 - 2023 390 Adventure
- 2020 - 2023 RC390
Choice of switch
Factory 890
A factory KTM 890 combination switch is provided. This has all the same features plus cruise control. The combination switch is modified and rewired to match the 390 plugs.
Soft Touch Switch
This new soft touch switch is marked with set and cancel icons. Best for budgets and OEM looks, No RESUME function. Mounts on a standard 22mm bar. Watertight and made from durable PA6+20%GF. See product page for dimensions.
Micro Toggle
If you are looking for something more budget friendly we can also supply a top notch waterproof micro toggle for mounting anywhere. The toggle option only provides SET and Cancel functions, No Resume. This does fit inside the existing switch housing with only a 1/4" drill and some neat wire routing.
LED lights and other upgrade compatibility
This kit is 100% compatible with any aftermarket lights and kits. No wire splicing or messing with brake wires.
Cruise Stop Conditions
We know its paramount on motorbikes to quickly kill the cruise control in as many situations as possible. Our module will disengage cruise control for any one of the following conditions
- Engine RPM signal falls below 1000 or above defined max
- Front brake lever*
- Clutch lever is pulled
- Bike transmission is in first gear or neutral
- Any one of the required CANBUS packets are not updated within 1000 milliseconds
- A difference of 10% between the front and rear wheels
*The 390 CANBUS does not provide rear brake information
Configurability
The module has a weather tight USB-C connector for changing various settings such as speed increment size, PID gain, and throttle limits.
Diagnostic Port
This kit uses the diagnostic port of your bike. If you want a second port for OBD and Off Road dongles see addon section.
Install Difficulty
To install this kit you must remove the tank and split the headlight housing. About 2 hours install time with proper tools. T-harness will override the throttle signals and diagnostic connector will collect important speed data.
Manual / Install
Click here for PDF Installation manual
Customer Videos
Lookout Moto:
VirajVrooms:
One Old Man Riding:
Share
Customer service great and product as represented !!! And it works on my 2024 KTM 390 Adventure!!
Easy to fit. Bit of a pain to get all the wiring squeezed back into the headlight housing but managed it in the end. Works well.
Only suggestion for improvement would be the soft touch switch. It does not open up enough to go over the bars (without removing the handgrips/switchblock etc). I did not want to remove my grips as I had just glued on new heated grips, so I had to cut the switch to get it over the bars. I drilled 2 small holes and used a zip tie to secure it. Maybe future versions could have a hinge or a two part mount so it can be fitted on the bars without grip/switchblock removal.
I purchased the harness with the OEM 890 Switch (love the factory look!). Finally had the bike out for a longer 200mi+ ride and truly love it! It holds a nice steady speed and is super simple to use. Yes, the install is tedious, but customer support is great and it is so worth it in the end! I no longer dread fwy riding on this bike; it used to be frustrating trying to keep a steady speed since a low power bike is easily affected by wind, hills, etc. The cruise control completely fixes that annoyance and you get to rest your hand. Highly recommend it!
Just installed on my 2022 RC390. Bike should have come with this from the factory. Install was easy just take your time. On the RC didn’t even need to remove the gas tank, or side faring to install. Beyond happy with the product and works great!!
Had a slight issue with the kit when I installed it, Jackson replied within minutes to an email I sent on a Saturday night to talk me through getting the unit to work properly! A few extra emails back and forth to identify a small issue I should have caught on my own, and the bike now has cruise control like its big brothers! Love that they were able to utilize the 890 oem switch for cruise control, it looks like the bike came with it from the factory!
As for the install itself, it would be incredibly simple if it weren't for KTM's design behind the headlight! There's very little room in there, so you have to re-route all the oem wiring to gain as much space as possible for reinstalling the headlight into the bucket. I think my install took less an hour, including mounting the new left switch stalk on the handlebar, but took another 2 hours to get everything to line up just right for the headlight to go back in!!! Literally the hardest part of the job is getting it all back together!
Having said that, I wouldn't hesitate to do it again, and now knowing how to route the wires neatly in the headlight bucket would make the installation of this complete kit a total of 3 hours just "casually" installing this kit and not rushing through the process.
Accessories, Addons & Spare Parts
-
Honda Service Connector 070MZ0010300
Regular price $29.00 CADRegular priceUnit price / per -
Add Second Diagnostic connector
Regular price $36.00 CADRegular priceUnit price / per -
KTM OFF ROAD/ABS/BAD FUEL Software
Regular price $48.00 CADRegular priceUnit price / per -
Soft Touch Switch
Regular price $30.00 CADRegular priceUnit price / per